AutoCAD Civil 3D - Stormwater

AutoCAD Civil 3D - Stormwater

Reply
Distinguished Contributor
ThomasGlidewell
Posts: 147
Registered: ‎10-03-2006
Message 1 of 3 (207 Views)

SSA - Modeling Cross-Connections

207 Views, 2 Replies
04-30-2012 08:49 AM

I am looking for advice on how to model storm sewer cross connections in SSA.  We have large trunk sewers that are inter-connected at a few locations.  Basically two large pipes coming together and two large pipes leaving.  In some cases, one of the pipes leaving is slightly higher than the other outlet pipe.  We tried modeling as a simple junction, but this does not seem to accurately split the flows.  Any advice would be appreciated.

*Expert Elite*
wfberry
Posts: 1,842
Registered: ‎09-05-2006
Message 2 of 3 (203 Views)

Re: SSA - Modeling Cross-Connections

04-30-2012 12:58 PM in reply to: ThomasGlidewell

The program allows Flow Diversion Structures, limited to only two dischage outlets per structure (your situation).  Unfortunately that is the extent of my knowledge on this subject.

 

Bill

 

 

Valued Mentor
Hidden_Brain
Posts: 668
Registered: ‎03-24-2009
Message 3 of 3 (104 Views)

Re: SSA - Modeling Cross-Connections

06-21-2012 07:23 PM in reply to: ThomasGlidewell

did you ever find a solution to this topic? i would be interested to know how to model split flows in SSA, like i can model split flows in HEC-RAS for open channels.

 

i think Bill's suggestion is great and in the right direction, as the flow diversion tool allows two outlets. my initial thought was the "overflow" option in flow diversion, but that would not be a true split flow condition, as the excess flow will only divert to the secondary link when the primary is flowing full in that case. hopefully Matt or someone very knowledgeable in these topics can shed some light into this.

 

 *EDIT: i *think* that you may be able to model the manhole as a storage node, as that should allow multiple outlets. just a thought. i will have to test it tomorrow.

Avishek Chhibber, P.E., CFM
Civil 3D 2013 SP2, Win 7-64 bit
8GB RAM
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.