AutoCAD Civil 3D - Stormwater

Reply
Contributor
rdbauer50
Posts: 11
Registered: ‎11-28-2012
Message 1 of 5 (312 Views)
Accepted Solution

SSA Area Inlets

312 Views, 4 Replies
11-28-2012 09:53 AM

I have searched the posts and have not found a true answer to my question. My question is, in SSA how would you model an inlet in say a parking lot that is NOT a curb inlet but an "area inlet" that is in sag. For the project, we are using Neenah grates and so would like to use the Neenah inlet manufacturer. I found several posts similar, but nothing that answered the question completely. Any help would be great.

 

SSA 2012 and Civil 3D 2012 (We do have 2013 as well but haven't installed it yet)

 

Rich

Rich Bauer, MS, PE, SIT, M.ASCE
Engineering Department Manager
RB & Associates Consulting, Inc.
www.rb-associates.net

Ok, I'll do it all for you...

 

Capture.JPG

Valued Mentor
fcernst
Posts: 1,104
Registered: ‎01-07-2011
Message 2 of 5 (307 Views)

Re: SSA Area Inlets

11-28-2012 02:10 PM in reply to: rdbauer50

 

 

Capture.JPG

Fred Ernst, PE
C3D 2015
Ernst Engineering
www.ernstengineering.com
Contributor
rdbauer50
Posts: 11
Registered: ‎11-28-2012
Message 3 of 5 (300 Views)

Re: SSA Area Inlets

11-28-2012 04:04 PM in reply to: fcernst

I got that much, but it is for a roadway with gutter.Grate Inlet.png

Rich Bauer, MS, PE, SIT, M.ASCE
Engineering Department Manager
RB & Associates Consulting, Inc.
www.rb-associates.net
Valued Mentor
fcernst
Posts: 1,104
Registered: ‎01-07-2011
Message 4 of 5 (297 Views)

Re: SSA Area Inlets

11-28-2012 05:06 PM in reply to: rdbauer50

Ok, I'll do it all for you...

 

Capture.JPG

Fred Ernst, PE
C3D 2015
Ernst Engineering
www.ernstengineering.com
Contributor
rdbauer50
Posts: 11
Registered: ‎11-28-2012
Message 5 of 5 (288 Views)

Re: SSA Area Inlets

11-29-2012 06:23 AM in reply to: fcernst

Oh, I see! I looked and looked and didn't see that. Thank you for the clarification. Maybe a wish for the next version should be to have that included in the prompts rather than buried in the pdf document. 

 

Thanks again!

 

Rich

Rich Bauer, MS, PE, SIT, M.ASCE
Engineering Department Manager
RB & Associates Consulting, Inc.
www.rb-associates.net
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.