AutoCAD Civil 3D - Stormwater

AutoCAD Civil 3D - Stormwater

Reply
Active Contributor
33 Posts
0 Kudos
Registered: ‎05-25-2011
Post 1 of 5

RIVER ANALYSIS

363 Views, 4 Replies
07-06-2012 01:15 PM

Am working in River Analysis dwg and go to save and get message "One or more objects cannot be saved to the specified format."

What's the deal?

Active Member
7 Posts
1 Kudo
Registered: ‎05-23-2012
Post 2 of 5

Re: RIVER ANALYSIS

07-19-2012 06:45 AM in reply to: rhschneider

I've had this happen and never found a good answer. I had to restart my drawing from scratch, I'm sad to say. I suspect it had something to do with sheet set manager, but couldn't verify.

Good luck

Employee
2,909 Posts
34 Kudos
Registered: ‎05-13-2005
Post 3 of 5

Re: RIVER ANALYSIS

07-19-2012 07:06 AM in reply to: rhschneider

If you feel that this is related to River Analysis, please submit the feedback to the labs.civil3d.river email address.

Matthew Anderson, PE
Product Manager
Active Contributor
33 Posts
0 Kudos
Registered: ‎05-25-2011
Post 4 of 5

Re: RIVER ANALYSIS

12-27-2013 01:09 PM in reply to: Matt.Anderson

DECEMBER 2013

This is happening again. Began saving after every command and when I created 1st river section got the message. Very frustrating!!

Employee
2,909 Posts
34 Kudos
Registered: ‎05-13-2005
Post 5 of 5

Re: RIVER ANALYSIS

01-02-2014 01:32 PM in reply to: rhschneider

I have seen others during my AU lab get the same error, but I have not been able to reproduce the situation that produces the issue.

 

I would suggest opening a support request.  In the request, we will likely need to know what other Autodesk software is installed to determine what is causing the conflict and error message.

 

Matthew Anderson, PE
Product Manager
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!