AutoCAD Civil 3D - Stormwater

AutoCAD Civil 3D - Stormwater

Reply
*Tim Scott
Message 1 of 3 (314 Views)

Number of Barrels in the Pond Culvert prints wrong

314 Views, 2 Replies
04-05-2010 01:15 PM
Civil3D2010

Has anyone noticed that when you print a Hydraflow Report that the Culvert
(or outlet from the pond) will be printed out as 10 times the number of
barrels as you actually have?
Notice in the png file attached that the Culv/Orifice A is 36 inch dia, with
1 barrel. On the print out it will show as 10. Enter 10 and it will show as
100, enter 5 and it will show as 50.
Now look at the pdf file called Culvert Barrels.pdf under number of barrels.
10. WTH?

Does anyone know of this? It is not REALLY calculating 10 pipes is it? Does
the same for Culvert B.

Tim
*wfb
Message 2 of 3 (314 Views)

Re: Number of Barrels in the Pond Culvert prints wrong

04-06-2010 05:39 AM in reply to: *Tim Scott
The last I "heard" in this NG.was from

John Mayo - 12-14-09 (John is "one of us".)

"As per support this is a known issue that is due to be fixed in the next
release."--
John Mayo, PE
Employee
Matt.Anderson
Posts: 2,909
Registered: ‎05-13-2005
Message 3 of 3 (314 Views)

Re: Number of Barrels in the Pond Culvert prints wrong

04-06-2010 07:19 PM in reply to: *Tim Scott
White-out.
Matthew Anderson, PE
Product Manager
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.