AutoCAD Civil 3D - Stormwater

AutoCAD Civil 3D - Stormwater

Reply
Distinguished Contributor bf
Distinguished Contributor
bf
Posts: 219
Registered: ‎08-27-2003
Message 1 of 5 (207 Views)

multiple systems in one plan

207 Views, 4 Replies
08-09-2012 07:08 AM

I have 6 separate drainage systems, all with separate outfalls within a large area.  Will SSA run a project with multiple systems? 

To print a png, do I need to make a pdf first then convert?

*Expert Elite*
wfberry
Posts: 1,872
Registered: ‎09-05-2006
Message 2 of 5 (206 Views)

Re: multiple systems in one plan

08-09-2012 07:42 AM in reply to: bf

I do not have any stock in Snagit, but if you ever had this you would not leave home without it.

 

Anyway, I know of no reasons not to use PDF.  It is the BMPs that are atrociously large.  No ".doc" files either.

 

Now back to your question, I am not sure but I think you can.  Wait for Matt the SSA guru to show up or someone that is more experienced than me.

 

Bill

 

 

Distinguished Contributor bf
Distinguished Contributor
bf
Posts: 219
Registered: ‎08-27-2003
Message 3 of 5 (200 Views)

Re: multiple systems in one plan

08-09-2012 08:07 AM in reply to: wfberry

Going to check out Snagit.  I hope I can run all at once.  Thanks for the reply.

Distinguished Contributor bf
Distinguished Contributor
bf
Posts: 219
Registered: ‎08-27-2003
Message 4 of 5 (199 Views)

Re: multiple systems in one plan

08-09-2012 08:41 AM in reply to: bf

and here's the plan with additional sub-basins and outfalls to be added

Contributor
rgalbraith
Posts: 15
Registered: ‎12-13-2010
Message 5 of 5 (175 Views)

Re: multiple systems in one plan

08-10-2012 05:16 AM in reply to: bf

Yes, SSA is capable of handling multiple systems with multiple outfalls.

Civil 3D 2013 / 2014
Win7 x64
Core i7-2600 @ 3.4 GHz
8Gb Ram
AMD Radeon HD 6700
Dell XPS 8300
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.