AutoCAD Civil 3D - Stormwater

AutoCAD Civil 3D - Stormwater

Reply
Active Member
cadintexas
Posts: 6
Registered: ‎12-03-2010
Message 1 of 3 (179 Views)
Accepted Solution

labeling inlets in street profiles to reflect street alignment stationing

179 Views, 2 Replies
09-28-2012 09:36 AM

I'm very new to Civil 3D. 

 

I've created a network of my stormsewer (which means the stormsewer lines are all on different streets) and added the inlets to my street profiles. 

 

How do I get the profile structure labels to reflect the stationing from the street alignments?

 

Thank you!

If you go into the structure properties, under part properties, general, referane alignment. You will have to have both the storm sewer model and the alignment you are using shortcutted into the drawing.

Active Contributor
rdbrennan48
Posts: 32
Registered: ‎12-05-2011
Message 2 of 3 (167 Views)

Re: labeling inlets in street profiles to reflect street alignment stationing

10-01-2012 05:44 AM in reply to: cadintexas

If you go into the structure properties, under part properties, general, referane alignment. You will have to have both the storm sewer model and the alignment you are using shortcutted into the drawing.

Active Member
cadintexas
Posts: 6
Registered: ‎12-03-2010
Message 3 of 3 (153 Views)

Re: labeling inlets in street profiles to reflect street alignment stationing

10-02-2012 11:52 AM in reply to: rdbrennan48

Thank you!

That was just what I needed!

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.