Joe -
You do know what your are doing. Hydraflow is solving for the HGL,
while attempting to match the slope of the ground (based on depth) so
there may be other things going on. Most hand calculations attempt to
solve full flow pipe.
Do you mind email me your STM file? anderson at jaseng dot com.
Matthew Anderson, PE
On 5/19/2010 4:48 PM, Joe Bouza wrote:
> Or maybe I do? But this program is making me feel stupid
> I am trying to understand the ticks of the software and keep coming up
> empty. My codes are set to a min slope 0.2% and max slope 10% design
> velocity 2.5 fps
> My first pipe has 6 cfs. My hand calculation says I could flow at 3.5
> fps @ 0.4% - so why is the program telling me 3.5 fps @ 6.37% ! why
> does it not go to 0.4%
>
> --
> Thanks, Joe
> Joseph D. Bouza, P.E. (one of 'THOSE' People)
> Civil 3D 2008
> Win XP pro
> v 2002, sp 2
> hp workstation xw4600
> Intel Core Duo CPU
> E7200 @2.53 GHz
> 3 GB RAM
> NIVDIA Quadro FX 1700 (512MB)
> ==============================
> "All Contours are Lies! "-( AJ)
> ===========================
> The mantra of a former Flamer:
> If you are forced to eat an Elephant, dont complain about it; Take
> one bite at a time.
> *****************************************************************************************
> In memory of the King of Work-arounds
> "The only Constant is Change".
> "The only thing worse than training your staff, and having them leave is -
> not training your staff, and having them stay." 😮
> A reminder taken from Graphics Solution Providers' Calendar page
> *****************************************************************************************
> "An Equal Opportunity Annoyer" (DK)