Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Forum Moderator: Can you have someone from Autodesk respond to this. A short white paper would be helpful.
Was there a change in methodology? What equations were changed if any. Was the junction loss methodolgy changed from the Approximate Method to the HEC 22 full method? Was inlet control addressed, supercrtitcal flow issues addressed, etc.
Fred Ernst, PE C3D 2024 Ernst Engineering www.ernstengineering.com
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")