AutoCAD Civil 3D - Stormwater

AutoCAD Civil 3D - Stormwater

Reply
Member
iepms
Posts: 4
Registered: ‎10-27-2012
Message 1 of 3 (404 Views)
Accepted Solution

Hydraflow Express Culverts - Negative Invert Elevation

404 Views, 2 Replies
10-27-2012 04:03 PM

I am analysing a culvert in a tidal zone which has an outlet invert level below the normal tidal range. The invert level of the culvert outler is -0.520m, however Hydraflow Express Culverts will not allow a negative invert elevation to be entered.

Does anyone know a way around this?.

 

Regards

Lar Hughes

 

Lars -

 

The workflow would be to move the datum up such that 0 m is now 10m and all of the elevations are postive.

 

It would be advisable to use Autodesk Storm and Sanitary Analysis for tidal culverts.  It does not have the negative elevation limitation and can adequately solve tidal culverts with flap gates.

Employee
Matt.Anderson
Posts: 2,909
Registered: ‎05-13-2005
Message 2 of 3 (391 Views)

Re: Hydraflow Express Culverts - Negative Invert Elevation

10-29-2012 06:36 AM in reply to: iepms

Lars -

 

The workflow would be to move the datum up such that 0 m is now 10m and all of the elevations are postive.

 

It would be advisable to use Autodesk Storm and Sanitary Analysis for tidal culverts.  It does not have the negative elevation limitation and can adequately solve tidal culverts with flap gates.

Matthew Anderson, PE
Product Manager
Member
iepms
Posts: 4
Registered: ‎10-27-2012
Message 3 of 3 (382 Views)

Re: Hydraflow Express Culverts - Negative Invert Elevation

10-29-2012 04:51 PM in reply to: Matt.Anderson

Matt

 

Thank you very much for your reply. I will try and model this culvert in SSA. Do you know if SSA will output similar results for a culvert as Hydraflow Express - i.e. HGL's, Hw Elevation, Hw/D, results schematic and wheter the culvert flow regime is inlet or outlet control.

 

Thanks

 

Lar

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.