AutoCAD Civil 3D - Stormwater

AutoCAD Civil 3D - Stormwater

Reply
Active Contributor
alexandre_ssp
Posts: 34
Registered: ‎08-06-2012
Message 1 of 3 (224 Views)

flood maps based on Dam Break scenario

224 Views, 2 Replies
01-24-2013 10:05 AM

The topic would be a simulation of the area that will be affected by floods if a tailing dam breaks, I guess we can call the objective a flood zone risk map(the scenario refers to a hypothetical dam rupture because of some reason and the flood induced by the tailing that is retained by the dam).

Valued Mentor
fcernst
Posts: 1,120
Registered: ‎01-07-2011
Message 2 of 3 (212 Views)

Re: flood maps based on Dam Break scenario

01-24-2013 06:45 PM in reply to: alexandre_ssp
No, not currently. No visualization of a flood wave.
Fred Ernst, PE
C3D 2015
Ernst Engineering
www.ernstengineering.com
Valued Mentor
Hidden_Brain
Posts: 688
Registered: ‎03-24-2009
Message 3 of 3 (191 Views)

Re: flood maps based on Dam Break scenario

01-28-2013 04:17 PM in reply to: alexandre_ssp

have you looked into using HEC-RAS for the dam breach?

Avishek Chhibber, P.E., CFM
Civil 3D 2013 SP2, Win 7-64 bit
8GB RAM
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.