Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I am working on a storm sewer study of an existing sewer system. I have completed the model using a pipe network, but have a problem when data referencing the network into another drawing. When I did the data reference into the new drawing several pipes disconnected from the structures they were connected to. When I went back to the actual model they were still connected.
If you check the structure properties in the data-shortcut'ed file, do they pipes list as connected?
You may have structure blocks that scale up/down with change in annotation scale, the reason why when they become smaller, the pipes appear to stop short of the structure.
Are you using different computers that may not all be using the same structure library. I see lots of odd netowork errors when people are using different libraries.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")