AutoCAD Civil 3D - Stormwater

AutoCAD Civil 3D - Stormwater

Reply
*Expert Elite*
wfberry
Posts: 1,842
Registered: ‎09-05-2006
Message 11 of 21 (755 Views)

Re: Cannot print from SSA 2013

08-07-2012 11:39 AM in reply to: bigblittlerent

Back in late JUNE, I was informed that it was a BUG in 2013.

 

 

Bill

 

 

Distinguished Contributor
bigblittlerent
Posts: 260
Registered: ‎03-26-2008
Message 12 of 21 (753 Views)

Re: Cannot print from SSA 2013

08-07-2012 11:41 AM in reply to: wfberry

Tx for the update.

Active Contributor
rdbrennan48
Posts: 32
Registered: ‎12-05-2011
Message 13 of 21 (745 Views)

Re: Cannot print from SSA 2013

08-09-2012 11:54 AM in reply to: wfberry

Any work on if they are fixing it and when. It's kinda annoying!

*Expert Elite*
wfberry
Posts: 1,842
Registered: ‎09-05-2006
Message 14 of 21 (740 Views)

Re: Cannot print from SSA 2013

08-09-2012 12:56 PM in reply to: rdbrennan48

Just remember one thing.  As long as Autodesk is on the NASDAQ or any other board, the employees are mandated to not divulge anything that may influence stock prices.

 

Just remember, no news until it is a fact.

 

Bill

 

 

Active Member
dwillis
Posts: 6
Registered: ‎07-16-2012
Message 15 of 21 (706 Views)

Re: Cannot print from SSA 2013

09-05-2012 07:47 AM in reply to: mrich012

I contacted Autodesk in July 2012 and got this answer from their Support Specialist:

 

I would like to inform you that the issue you reported is a known issue with our development team. It has been documented and sent to our development team for investigation.   

As a workaround for the print command, you may want to first generate the Custom Report/PDF report or copy the ASCII reports to Textpad/Notepad or generate the spreadsheet report to print it out from the PDF or Spreadsheet. Alternatively, you may save the model and open it in SSA 2011 or 2012 and print it from there.

 

While this is all good and well if you want to print reports, it doesn't help with printing the Plan View layout.  I had to download the 2011 version of SSA and so far have had good luck with printing.  The problem with 2011 SSA, however, is having to dumb down all our 2013 AutoCAD files that we want to insert as backgrounds.

Valued Contributor
spilon
Posts: 52
Registered: ‎03-07-2006
Message 16 of 21 (667 Views)

Re: Cannot print from SSA 2013

10-17-2012 08:24 AM in reply to: wfberry

Has anyone heard about a fix for this issue?

Member
mgraun
Posts: 4
Registered: ‎03-04-2008
Message 17 of 21 (650 Views)

Re: Cannot print from SSA 2013

10-22-2012 06:04 AM in reply to: wfberry

Yes, we are also having issues with this... Has anyone found a solution to the problem?

Valued Contributor
spilon
Posts: 52
Registered: ‎03-07-2006
Message 18 of 21 (644 Views)

Re: Cannot print from SSA 2013

10-22-2012 06:20 AM in reply to: wfberry

I submitted a Support Request to Autodesk and received this note back:

 

You are correct, the issue with print command from SSA 2013 is a known issue with our development team. It has been documented and sent to our development team for investigation. I am afraid I do not have any ETA for the fix at the moment.

As a workaround for the print command, you may want to first generate the Custom Report/PDF report or copy the ASCII reports to Textpad/Notepad or generate the spreadsheet report to print it out from the PDF or Spreadsheet. Alternatively, you may save the model and open it in SSA 2011 or 2012 and print it from there.

 

So I guess we'll have to wait for a hotfix.

Member
mgraun
Posts: 4
Registered: ‎03-04-2008
Message 19 of 21 (642 Views)

Re: Cannot print from SSA 2013

10-22-2012 06:22 AM in reply to: spilon

Thanks for the update...

New Member
mwatts123
Posts: 1
Registered: ‎12-26-2012
Message 20 of 21 (562 Views)

Re: Cannot print from SSA 2013

12-26-2012 10:53 AM in reply to: mrich012

I get an error when trying to print from SSA 2013 like everyone else.

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.