AutoCAD Civil 3D - Stormwater

AutoCAD Civil 3D - Stormwater

Reply
Member
NoWandering
Posts: 4
Registered: ‎12-26-2012
Message 1 of 4 (203 Views)

Average depth attained = 0

203 Views, 3 Replies
12-26-2012 01:56 PM

I just learned to use SSA. After running the model, the average depth attained is only 0.02-0.07 ft in the Node Depth Summary. What is the possible reason? Many thanks.

Active Contributor
jmiller0621
Posts: 38
Registered: ‎05-18-2010
Message 2 of 4 (173 Views)

Re: Average depth attained = 0

01-03-2013 12:44 PM in reply to: NoWandering

Sorry.  Can't answer the question without more information or a file.

Employee
Matt.Anderson
Posts: 2,909
Registered: ‎05-13-2005
Message 3 of 4 (154 Views)

Re: Average depth attained = 0

01-17-2013 01:35 PM in reply to: NoWandering

The longer you run the simulation when the depth at your node is zero, your average will decrease. 

Matthew Anderson, PE
Product Manager
Member
NoWandering
Posts: 4
Registered: ‎12-26-2012
Message 4 of 4 (127 Views)

Re: Average depth attained = 0

02-05-2013 07:33 AM in reply to: Matt.Anderson

Matt, you are right.

 

I figured it out before you replied this. Originally I used 30 days. After changed to 1 day, the average depth is reasonable.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.