AutoCAD Civil 3D - Stormwater

AutoCAD Civil 3D - Stormwater

Reply
Active Contributor
mayhap
Posts: 38
Registered: ‎07-31-2008
Message 1 of 4 (8,367 Views)

Autodesk Storm and Sanitary Analysis 2012 tutorials

8367 Views, 3 Replies
06-13-2011 01:56 PM

I have looked though the discussion groups, even Googled it, and I am having a hard time finding any step by step tutorials or training of any kind on this? all the older posts I have read about people asking for the same thing seemed to have been left unanswered from a year ago +. After all this time, no one has created a step by step anything?

 

If I am missing soemthing, please let me know, it wouldn't be the 1st time.

 

thank you!

*Expert Elite*
wfberry
Posts: 1,870
Registered: ‎09-05-2006
Message 2 of 4 (8,352 Views)

Re: Autodesk Storm and Sanitary Analysis 2012 tutorials

06-14-2011 05:51 AM in reply to: mayhap

I did a quick google:

 

http://www.youtube.com/watch?v=WsZte_HhGAs

 

There are others on this page.  (Well, at least one.)

 

Bill

Active Member
randellboney1025
Posts: 8
Registered: ‎03-25-2011
Message 3 of 4 (8,269 Views)

Re: Autodesk Storm and Sanitary Analysis 2012 tutorials

06-21-2011 04:47 AM in reply to: mayhap

You can find some step by step training thru Autodesk University or as Subscription User thru Autodesk University.

New Member
bradleykiewiet
Posts: 1
Registered: ‎08-31-2012
Message 4 of 4 (3,550 Views)

Re: Autodesk Storm and Sanitary Analysis 2012 tutorials

08-31-2012 02:48 AM in reply to: mayhap

Go to Analyzing catchments in Storm and Sanitary analysis (on the help tab). At the bottom you'll find setting up the part matching settings in Autocad and exporting them to Storm and Sanitary analysis.

 

Study that tutorials. Hope it helps

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.