Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Is there a way to add new data to an existing SSA project, such that the new data is properly georeferenced. I need to add subbasins, split some subbasins, add pipes, etc. The only way I've found to do this, is to make the changes in CAD and import to a new SSA file... which I don't want to do. This also loses a lot of data as my open channels, inlet types, etc. are lost in the transition (I'm assuming because such items are not defined in CAD). SSA 2012 Thanks
Also - do inlets not also act as junctions? My inlets are showing as flooded, though the surface inflows are quite small. The data screen for inlets doesn't provide information about depth within the box, just depth on the inlet grate. Do I need to use separate junctions to connect pipes?
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")