Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Working back and forth from plan view and profile view

9 REPLIES 9
Reply
Message 1 of 10
arick4022
752 Views, 9 Replies

Working back and forth from plan view and profile view

I was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?

 

Thank you for all of your help!!

 

Aaron M. Rick, PEI, LSIT

 

EDR ENGINEERING

4900 Waters Edge Drive, Suite 170

Raleigh, North Carolina 27606

 

 

9 REPLIES 9
Message 2 of 10
troma
in reply to: arick4022

Would a corridor help?

 

I've seen others talking about exporting a profile as a feature line in plan view, but I can't find how to do it.


Mark Green

Working on Civil 3D in Canada

Message 3 of 10
Jeff_M
in reply to: arick4022

Create Points->Alignments, Measure and then Profile Geometry Points That will likely give you more than you want, but the points won't be in order since it's a 2 step process.

Jeff_M, also a frequent Swamper
EESignature
Message 4 of 10
sboon
in reply to: arick4022

Forget about exporting points, that's the old school way of doing layout.  Your GPS equipment can probably accept the alignment and profile directly, so that you can layout the path at any station and offset you want.

 

What type of equipment are you using in the field?

Steve
Expert Elite Alumnus
Message 5 of 10
arick4022
in reply to: sboon

We have a Leica TCRP 1203 Robotic Total Station. How do you transfer the alignment and profile information from AutoCAD Civil 3d 2010 to the Leica?

Message 6 of 10
sboon
in reply to: arick4022

Try this link.

 

Most survey equipment can also use xml files exported from Civil3d.

Steve
Expert Elite Alumnus
Message 7 of 10
Joe-Bouza
in reply to: troma

Hi troma,

 

There are a few options:

 

you can create label style that show the vertical profile with the station labels

you can create points by station offset (i think that can also be done by reading a txt file - I remember doing it in LDT so c3d must have it)

you can create a fl from the alignment

Allen and John have talked about turning on the 3d chain in the style , exploding the profile and being left with the profile in plan

Almost forgot there is the tool box reports too

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People)

HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win10 OS
Message 8 of 10
AllenJessup
in reply to: arick4022

if you explodethe chain remember to do it to a COPY
Because it explodes the whole profile.


Allen Jessup
Engineering Specialist / CAD Manager

Message 9 of 10
troma
in reply to: Joe-Bouza


Joe-Bouza wrote:

Hi troma,

 

....

 

you can create a fl from the alignment

Where is this command?  I can't find it.  What does it do if you have multiple profiles on that alignment?

 

Allen and John have talked about turning on the 3d chain in the style , exploding the profile and being left with the profile in plan

I don't know what that means.  What & where is 3D chain?  Not supprisingly it doesn't show up in the help.

 

 

Almost forgot there is the tool box reports too.

Are these for creating a feature line or points or just an xml report?

 

 


Mark Green

Working on Civil 3D in Canada

Message 10 of 10
Joe-Bouza
in reply to: troma


@troma wrote:


@Joe-Bouza wrote:

Hi troma,

 

....

 

you can create a fl from the alignment

Where is this command?  I can't find it.  What does it do if you have multiple profiles on that alignment?

 

The fl can be dynamic to the profile changes if the check box is selected. One caviat: thelayout must match existing at both ends or you can get unpredictable results

 

FL ALIGNMENT.png

 

 

FL ALIGNMENT2.png

Allen and John have talked about turning on the 3d chain in the style , exploding the profile and being left with the profile in plan

I don't know what that means.  What & where is 3D chain?  Not supprisingly it doesn't show up in the help.

 

3dchain1.PNG

 

3dchain2.PNG

 

 

 

 

Almost forgot there is the tool box reports too.

Are these for creating a feature line or points or just an xml report?

 

REPORT

 

 


 

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People)

HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win10 OS

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report