AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Member
hdn9298
Posts: 8
Registered: ‎08-27-2011
Message 1 of 4 (1,195 Views)
Accepted Solution

Volume Tables for Multiple Section Views Civil 3D 2011

1195 Views, 3 Replies
01-23-2012 09:32 AM

Hi everyone, I've tried a Google search on this matter to no solution, so I am hoping to find one here.

 

I am working on a corridor project where I have to make section views of the road.  I created my sample lines by range of stations, and made all of my section views from there.  Now I need to add volume tables for each section view.

 

I have 28 section views, and more to come when I do another set of sample lines for another road, and I don't feel like going through each section view individually to make volume tables for them.

 

Is there a way I can create total volume tables for all of my section views at the same time?  It would save a lot of time!

 

Thank you.

Yes.  Click on one of the section view grids.  On the contextual ribbon, click on View Group Properties.  In the dialog box, click on the ellipsis for Change Volume Tables.  This will update ALL of the section at one time.  I attached an image.

*Expert Elite*
TRogers
Posts: 1,348
Registered: ‎09-05-2007
Message 2 of 4 (1,183 Views)

Re: Volume Tables for Multiple Section Views Civil 3D 2011

01-23-2012 11:11 AM in reply to: hdn9298

Yes.  Click on one of the section view grids.  On the contextual ribbon, click on View Group Properties.  In the dialog box, click on the ellipsis for Change Volume Tables.  This will update ALL of the section at one time.  I attached an image.

If the issue was resolved by this method, please click on "Accept As Solution"
*Civil 3DJ*
Todd Rogers

Visit my blog here.

     
Active Member
hdn9298
Posts: 8
Registered: ‎08-27-2011
Message 3 of 4 (1,153 Views)

Re: Volume Tables for Multiple Section Views Civil 3D 2011

01-23-2012 04:23 PM in reply to: hdn9298

That's exactly what I was looking for!  Thank you very much for your help!

Active Contributor
cadplayer
Posts: 29
Registered: ‎11-23-2009
Message 4 of 4 (1,020 Views)

Re: Volume Tables for Multiple Section Views Civil 3D 2011

02-29-2012 05:12 AM in reply to: hdn9298

In my example calculates not all secton views. But section view look like ok. Can you help me what I have to install

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.