AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Member
Dave_Lovse
Posts: 3
Registered: ‎01-24-2013
Message 1 of 4 (204 Views)
Accepted Solution

Viewport label issues

204 Views, 3 Replies
01-31-2013 11:03 AM

I'm having an issue with my c3d labels between layouts of the same scale, I have several 11x17 layouts in paperspace at 1:200 scale, no issues between these, but when I added a legal, letter and 11x17 portrait layout at the same scale my C3D label size is significantly smaller, probably 1/10th the size of my original layouts, all my layouts have the same view of the model space with same scales

Any thoughts?

Thanks

Check the units in the page setup.  If you're in metric, these need to be mm, but often get set to inches when using inch-sized paper.

If you're in imperial they need to be inches.

 

plot.png

 

*Expert Elite*
troma
Posts: 2,520
Registered: ‎05-21-2008
Message 2 of 4 (200 Views)

Re: Viewport label issues

01-31-2013 11:10 AM in reply to: Dave_Lovse

Check the units in the page setup.  If you're in metric, these need to be mm, but often get set to inches when using inch-sized paper.

If you're in imperial they need to be inches.

 

plot.png

 


Credit where credit is due! Give kudos or accept as solution whenever you can.

Valued Mentor
KirkNoonan
Posts: 425
Registered: ‎09-23-2008
Message 3 of 4 (197 Views)

Re: Viewport label issues

01-31-2013 11:12 AM in reply to: Dave_Lovse

Are you sure that you're plotting all of the layouts at 1:1 (or the same scale) using the same units?

Member
Dave_Lovse
Posts: 3
Registered: ‎01-24-2013
Message 4 of 4 (190 Views)

Re: Viewport label issues

01-31-2013 11:20 AM in reply to: troma

That did the trick, Thanks!!!!

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.