AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
New Member
sjones1052
Posts: 2
Registered: ‎09-24-2012
Message 1 of 3 (525 Views)
Accepted Solution

Viewing an Offset Asembly in Section Editor

525 Views, 2 Replies
09-24-2012 07:45 AM

I've built a corridor using only an Offset Assembly.  The assembly represents a new path alongside an existing road and I wanted to use the centerline of the road as the main baseline.  I have successfully built the corridor and was able to build the Sample Line and Sample Views.  However, I am not able to view the sections in the Section Editor.  As soon as I try to get into the Section Editor, I get the error message "No station found".  The stations are large, 500+00 and up, so I tried changing the BOP to 0+00, but that had no effect.  I tend to think it's a result of not having any subassembly attached directly to the main alignment, only to offset alignments.  I'm running the 2011 version.

 

Any help would be greatly appreciated.  Thanks.

If you place a LinkWidthandSlope subassy on the main baseline assy (with Omit Link set to Yes and be sure you delete link and point codes,) your offset assy will display in the Edit Sections window.

*Expert Elite*
tcorey
Posts: 2,765
Registered: ‎12-18-2002
Message 2 of 3 (520 Views)

Re: Viewing an Offset Asembly in Section Editor

09-24-2012 08:10 AM in reply to: sjones1052

If you place a LinkWidthandSlope subassy on the main baseline assy (with Omit Link set to Yes and be sure you delete link and point codes,) your offset assy will display in the Edit Sections window.

Tim Corey, Owner
Delta Engineering Systems
Redding, CA
Autodesk Authorized Value-Added Reseller
New Member
sjones1052
Posts: 2
Registered: ‎09-24-2012
Message 3 of 3 (517 Views)

Re: Viewing an Offset Asembly in Section Editor

09-24-2012 08:30 AM in reply to: sjones1052

I guessed I was missing something.  That was it.  Thanks for the help.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.