Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Using C3D 2010, I have labels in my vertical profile. Two curves are very close to each other and would like to move the PVT station and elevation text to the left and the PVC station and elevation text to the right so they do not overlap. How to I modify just these two labels. See attached PDF
grip edit should allow you to relocate. Note this takes on the drag state settings of your style.
Your Name Did you find this post helpful? Feel free to Like this post. Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Create 2 Child VC Label Styles. In one set the EVC TextComponent's Attachment to be BottomRight. Use this style for the left VC. Set the BVC TextComponent's Attachment to be TopRight in the other Child Style. Use this style for the right VC.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")