Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Using Divide Command

2 REPLIES 2
Reply
Message 1 of 3
jsbarnby
490 Views, 2 Replies

Using Divide Command

Hey guys. When using the divide command small points are left behind with an undefined elevation (0) and are a pain in the but to remove. Does anyone know a quick way of removing these remains or a way so that actual points are not used with the divide command?
2 REPLIES 2
Message 2 of 3
MDC_quadej
in reply to: jsbarnby

What I do to be able to see the points is change the setvar for PDMODE to 3. This will show the points with an X. You could also change the size with PDSIZE. A quick way to erase all the AutoCAD points in the drawing is to use the QSELECT command. Select the Object type of "Point" and Operator of "Select All", then erase the selection set.

HTH,
Jack
Message 3 of 3
Anonymous
in reply to: jsbarnby

When you use the divide command the acad point is the default entity to
designate the division. You could assign a block to be place at the
interval. Also, a QSELECT filtering POINT will help clean up.

--
Thanks, Joe

Joseph D. Bouza, P.E. (one of 'THOSE' People)
Civil 3D 2008
Win XP pro
v 2002, sp 2
hp workstation xw4600
Intel Core Duo CPU
E7200 @2.53 GHz
3 GB RAM
NIVDIA Quadro FX 1700 (512MB)
==============================
"All Contours are Lies! "-( AJ)
===========================
The mantra of a former Flamer:
If you are forced to eat an Elephant, don't complain about it; Take one bite
at a time.
*****************************************************************************************
In memory of the King of Work-arounds
"The only Constant is Change".

"The only thing worse than training your staff, and having them leave is -
not training your staff, and having them stay." 😮
A reminder taken from Graphics Solution Providers' Calendar page
*****************************************************************************************
"An Equal Opportunity Annoyer" (DK)

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report