Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Could someone verify that you cannot control the "C" dimension of any of the urban C&G family. We use it to model our wedge curb and roll curb. We have found on two of the machines here that you can control all of the dimension parameters except for "C" which is the dimension vertically between the EP and FL. No matter what we put in it uses 0.02'. You also cannot control this dimension by changing the slope between the EP and FL. Anyone confirm/deny.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")