AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Member
V-Rock
Posts: 4
Registered: ‎10-29-2012
Message 1 of 5 (373 Views)
Accepted Solution

unknown command

373 Views, 4 Replies
10-29-2012 12:09 PM

wht do I get unknown command "aecccreatealignment" when I have civil 3d and companion land desktop?

Hi,

 

+ adding to Tatiana:

>> What software are you using?

What profile is active? If you run Civil3D with the profile "as AutoCAD" then the AECC-commands are not available.

 

- alfred -

Alumni
machadt
Posts: 129
Registered: ‎10-25-2011
Message 2 of 5 (351 Views)

Re: unknown command

10-29-2012 02:04 PM in reply to: V-Rock

Hi Van,

What software are you using?

If you are getting a message like that most likely is product of a bad install, please run a reinstall of the software from the control panel.

Tatiana Machado
AEC-ENI Application Engineer
*Expert Elite*
Alfred.NESWADBA
Posts: 9,217
Registered: ‎06-29-2007
Message 3 of 5 (347 Views)

Re: unknown command

10-29-2012 02:09 PM in reply to: V-Rock

Hi,

 

+ adding to Tatiana:

>> What software are you using?

What profile is active? If you run Civil3D with the profile "as AutoCAD" then the AECC-commands are not available.

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
New Member
aamifam
Posts: 1
Registered: ‎09-09-2011
Message 4 of 5 (336 Views)

Re: unknown command

10-29-2012 03:31 PM in reply to: V-Rock

Thanks I'll try both solutions when I get to work tomorrow

Member
V-Rock
Posts: 4
Registered: ‎10-29-2012
Message 5 of 5 (317 Views)

Re: unknown command

10-30-2012 05:25 AM in reply to: Alfred.NESWADBA

Thanks Alfred! I got it going now:manhappy:

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.