AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
C3D_TomR
Posts: 61
Registered: ‎07-01-2010
Message 11 of 11 (142 Views)

Re: Undefined Alias Referenced

06-19-2013 12:27 PM in reply to: C3D_TomR

We later found the alias link was to a drawing that was attached via map. To remove the attachment:

 

  1. At the command line, type MAPWSPACE and press enter.
  2. When prompted, type ON and press enter.
  3. In the Task Pane that appears, select the Map Explorer tab.
  4. If there are drawings attached to the current drawing using map, there will be either a + or - to the left of the Drawings category.
  5. If there is a + by the Drawings folder, left click on it to expand the category.
  6. Right click each drawing in the Drawings category and select Detach from the menu.
  7. Now save and close the drawing and when you open it in the future, there shouldn't be any messages about a missing alias.

--T

 

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.