Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I have a viewport with a plan view rotated with a UCS. I have another viewport with my cross sections in WCS. While adjusting the alignment, while still in the UCS, the labels for the cross sections rotated based on the difference in angle from UCS and WCS. When I reset the plan to WCS, the cross section labels return to normal (after a regenall). Is there a toggle to keep the section labels from becoming "plan-readable"?
In the Label Style Composer, on the "General" tab, try the "Plan Readable
Text" setting. For other effects, you can change how the angle is
interpreted by setting the "Orientation Reference" to Object, WCS or View.
Chris Putnam
Software Engineer
Autodesk Civil 3D Team
