AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
New Member
Alimalek
Posts: 2
Registered: ‎02-27-2012
Message 1 of 3 (324 Views)

U turns modelling & marked point

324 Views, 2 Replies
10-12-2012 01:29 PM

Dear colleagues,

I'm trying to model a U-Turn as you can find in attached picture. I think it should be done by intersections tools (i.e. 2 different intersection) but unfortunately curb return alignments and profiles  doesn't work properly!!

and another question:

after U-Turn I have a median with varying width. I tried to use marked point and link to marked point subassemblies to model it. but the link didn't connect 2 corridor (i.e. North ands outh ways)

 

TNX FOR ATTENTION

Ali

*Pro
dgordon
Posts: 1,474
Registered: ‎12-14-2006
Message 2 of 3 (316 Views)

Re: U turns modelling & marked point

10-12-2012 01:39 PM in reply to: Alimalek

I'd forget the intersection tools and do this manually with a corridor and a few baselines and some good assemblies.

have you tried basic lane transition in place of marked point and link to marked point?

 

 

Dan

Civil 3D 2013
Win 7 Pro x64
Intel Xeon 2.0GHz
12Gb Ram
ATI Firepro 4800
Dell T5500
www.preinnewhof.com
Distinguished Mentor
andrewpuller3811
Posts: 793
Registered: ‎07-30-2008
Message 3 of 3 (276 Views)

Re: U turns modelling & marked point

10-14-2012 01:06 AM in reply to: Alimalek

I is doable with the intersection tools.

 

Attached is a link to a drawing with the intersection constructed as per your picture.

 

Sorry "The attachment file size is too large. The maximum file size is: 1,572,864 bytes"

 

https://www.yousendit.com/download/TEhVT0NWSWhHa004RmNUQw

 

I have attached a screenshot as well

If this fixed your issue, click on "Accept as Solution"

Andrew Puller
Maitland, NSW, Australia
Windows 7 Enterprise 64bit
Intel core i7 2600 @ 3.40 GHz with 16GB Ram
Civil 3d 2013 64bit
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.