Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Tin volume surface and a "fixed" value

2 REPLIES 2
SOLVED
Reply
Message 1 of 3
Fantoon
312 Views, 2 Replies

Tin volume surface and a "fixed" value

Hello,

 

I'm have a tin volume surface with contours ranging between -0.240 and 0.000m. 


I have a need to display this surface as followed:

 

-0.220  - 0.000m as -0.220.

-0.240 (-) -0.220 as it is.

 

I've tried using contour intervals but nothing seemed to happen.

 

Help is appriciated!


Sincerely

AutoCad 2019 & Civil3D 2019.
Lenovo P52
Intel i7 8850H @ 2.6GHz
32 GB RAM
512 GB SSD
NVIDIA Quadro P2000
2 REPLIES 2
Message 2 of 3
Joe-Bouza
in reply to: Fantoon

I don't fully understand what you are trying to accomplish but the "user" contours plot specic contours. This may help you

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People)

HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win10 OS
Message 3 of 3
Fantoon
in reply to: Joe-Bouza

I may have a solution based on your idea.

 

Thank you Joe.

AutoCad 2019 & Civil3D 2019.
Lenovo P52
Intel i7 8850H @ 2.6GHz
32 GB RAM
512 GB SSD
NVIDIA Quadro P2000

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report