AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Contributor
Fantoon
Posts: 46
Registered: ‎05-10-2011
Message 1 of 3 (214 Views)
Accepted Solution

Tin volume surface and a "fixed" value

214 Views, 2 Replies
10-05-2012 05:29 AM

Hello,

 

I'm have a tin volume surface with contours ranging between -0.240 and 0.000m. 


I have a need to display this surface as followed:

 

-0.220  - 0.000m as -0.220.

-0.240 (-) -0.220 as it is.

 

I've tried using contour intervals but nothing seemed to happen.

 

Help is appriciated!


Sincerely

AutoCad 2011 & Civil3D 2011. Product Version 3.
EliteBook 8560w
Intel i7 CPU 2820QM @ 2.3GHz
8 GB RAM
NVIDIA Quadro 1000M
Windows 7 Enterprise 32 Bit :smileysad:

I don't fully understand what you are trying to accomplish but the "user" contours plot specic contours. This may help you

*Expert Elite*
Joe-Bouza
Posts: 5,124
Registered: ‎12-15-2008
Message 2 of 3 (203 Views)

Re: Tin volume surface and a "fixed" value

10-05-2012 06:17 AM in reply to: Fantoon

I don't fully understand what you are trying to accomplish but the "user" contours plot specic contours. This may help you

Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
Active Contributor
Fantoon
Posts: 46
Registered: ‎05-10-2011
Message 3 of 3 (194 Views)

Re: Tin volume surface and a "fixed" value

10-05-2012 06:49 AM in reply to: Joe-Bouza

I may have a solution based on your idea.

 

Thank you Joe.

AutoCad 2011 & Civil3D 2011. Product Version 3.
EliteBook 8560w
Intel i7 CPU 2820QM @ 2.3GHz
8 GB RAM
NVIDIA Quadro 1000M
Windows 7 Enterprise 32 Bit :smileysad:
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!