AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Member
cmhguy01
Posts: 10
Registered: ‎01-19-2010
Message 1 of 7 (590 Views)

Text orient from xref

590 Views, 6 Replies
05-17-2011 01:40 PM

I have created a base plan that has lot numbers for a subdivision.  I have created the text style to align with the viewport orientation and it all works correctly.   I would like to xref that base plan into other blowup sheets and have the lot numbers scale and reorient to the new respective viewport.   The lots scale correctly but do not reorient, any ideas.

*Expert Elite*
wfberry
Posts: 1,870
Registered: ‎09-05-2006
Message 2 of 7 (583 Views)

Re: Text orient from xref

05-17-2011 01:48 PM in reply to: cmhguy01

Do you have the Orientation Reference set to VIEW?

 

Bill

 

Active Member
cmhguy01
Posts: 10
Registered: ‎01-19-2010
Message 3 of 7 (581 Views)

Re: Text orient from xref

05-17-2011 01:50 PM in reply to: wfberry

Where do you find that?  It sounds good.

*Expert Elite*
Sinc
Posts: 6,207
Registered: ‎11-18-2006
Message 4 of 7 (571 Views)

Re: Text orient from xref

05-17-2011 02:41 PM in reply to: cmhguy01

It's in the Style setting.

 

Unfortunately, I have not found this setting to work through XREFs...  :smileysad:

Sinc
Contributor
jane
Posts: 15
Registered: ‎02-18-2005
Message 5 of 7 (533 Views)

Re: Text orient from xref

05-18-2011 06:04 AM in reply to: cmhguy01

Location to set the orientation reference for label styles.  And it does work from an XREF. See the second image. The parcel drawing was referenced and the UCS for that viewport was changed. Worked perfectly.

View Orientation.jpg

View Orientation from XREF.jpg

Active Member
cmhguy01
Posts: 10
Registered: ‎01-19-2010
Message 6 of 7 (531 Views)

Re: Text orient from xref

05-18-2011 06:09 AM in reply to: cmhguy01

I did get it to work.  I just didn't get into a viewport in the linked drawing to see that it would rotate through the viewport but not in Modelspace.  Thanks.

Active Contributor
rainmanoliver1
Posts: 47
Registered: ‎06-22-2009
Message 7 of 7 (468 Views)

Re: Text orient from xref

10-13-2011 12:37 PM in reply to: cmhguy01

Hi all, 

I have been having a similar issue with MLEADERS. 

Is there a way to have a MLEADER in a base file rotate to be plan readable in an XREF file's ritated viewport?

 

We typically use MLEADERS not notes/labels.

 

thanks for any help....... 

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.