Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I have a set of 3d lines that i want to create a corridor from (I dont have
Existing Surface data)
So i have the road CenterLine, Shoulder, Cut/Fill line.
When i set a daylight target, it seems to only allow me to select a surface
My question is, can i target the cut/fill polyline, using one of the
daylight assemblies.
Try using the "LinkOffsetAndElevation" subassembly for the daylight link.
That should allow you to target the 3d polyline for the offset and the
elevation.
Regards,
Peter Funk
Civil 3D Product Manager
Autodesk, Inc.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")