Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Hi, if you mean the yellow symbol with the exclamation mark it usually means that your data is not updated. With a right mouse click you can rebuild your surface (or other object) if the source data is available. Check also the panorama event viewer for notifications.
IF you have added data to your TIN that is not available or cannot be found anymore the exclamation mark will not get away. Check the surface properties for any hints and also the panorama event viewer. If you cannot find the issue please attach your drawing in order to allow me to have a look myself.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")