Hello All,
I have a surface in Civil 3D which when I opened today is not displaying. All it shows is to border of the surface. I know the surface is there because it is still listed under prospector view and the points are still there. I have tried all the usual things; checked contour layers is on, checked contour interval etc. Can anyone help? Screen shot below:
http://screencast.com/t/siCqzvbifv
regards
Solved! Go to Solution.
Solved by neilyj666. Go to Solution.
Mark Green
Working on Civil 3D in Canada
I had this issue yesterday, i deleted the border from the surface and my contours came back. it was a small surface so instead of attaching a border, i manually eddited the surface to end were i wanted. I know this is not an answer as to the why, but i hope it helps.
Thanks,
Dave
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Thanks for the replies everyone. Will try these things at work tomorrow and let you know how I get on. I opened the file on my home PC and can see the surface no problem. So its not the file thats the problem.
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Neilyj,
Problem solved - was the level of detail. Turned it off and surface re-appeared. Thanks all.
neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.