Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Surface Corridor is NOT triangulating entire corridor boundary

2 REPLIES 2
Reply
Message 1 of 3
nhuckla
748 Views, 2 Replies

Surface Corridor is NOT triangulating entire corridor boundary

I have created a surface from a corridor.  I set the boundary of the surface to the daylight of the corridor.  In some areas of the corridor the surface does not triangulate see attached.  Has anyone had this problem?  How do I fix the issue?

2 REPLIES 2
Message 2 of 3
sboon
in reply to: nhuckla

It looks like your daylight feature lines are broken somewhere along the corridor, so the boundary is made from disconnected sections of feature line.  When the corridor builds do you get any error messages?  Try turning off all of the other feature lines so that you can see exactly what is being used for the boundary.

Steve
Expert Elite Alumnus
Message 3 of 3
scottie.wilson
in reply to: nhuckla

Use "corridor shrinkwrap" as the boundary for your surface within the corridor settings. If "corridor shrinkwrap" is not an option, just add another baseline ( a dummy baseline) and you will then have the shrinkwrap option.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report