Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I am setup Design Criteria Editor,
but I have problem for create formula for this conditions,
- Crowned pavement revolved about the inner edge
- Crowned pavement revolved about the outer edge
anybody can help me or give me something ideas with this problem.
regards, daniel
Edited by: daog on Feb 23, 2009 12:37 PM
Please, see attached image (Case II and III)
Edited by: daog on Mar 2, 2009 2:11 PM
As far as I'm aware C3D does NOT have an automatic setting for rotating about the inside or outside edge. It only automatically supers about the CL; automatically at least. If you want to rotate about the inside \ outside edge you have to do it manually with offset alignments and profiles and figure out the transition lengths \ slopes yourself.
Not the end of the world but crazy since you are expecting it to just be a toggle. LDT had it and all you had to do was choose a method for rotation. I wrote this off as something forgotten and will be added as folks complain and versions are refined.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")