AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Distinguished Contributor
MonkeyTrainer
Posts: 158
Registered: ‎11-30-2007
Message 1 of 6 (220 Views)
Accepted Solution

superelevated gutter

220 Views, 5 Replies
01-08-2013 02:12 PM

i have a superelevated road.

i have a road with a arc that curves to the left so, the gutter on the right is sloping towards the crown (positive slope.) i would like the gutter to slope away from the crown (negative slope.) how do i get the gutter to do this? i know it may sound weird to some, but i do need this to happen.

 

image attached, red arrow is what i don't need, cyan line is what i do need. 

 

thanks all,

You can lock in the gutter slope and ignore the lane slope.

 

 

*Expert Elite*
troma
Posts: 2,525
Registered: ‎05-21-2008
Message 2 of 6 (219 Views)

Re: superelevated gutter

01-08-2013 02:14 PM in reply to: MonkeyTrainer

Isn't there a setting to have this slope match the road slope?  I seem to remember being able to turn that off.  Then you can set your own slope or set it by the height differential you need.


Credit where credit is due! Give kudos or accept as solution whenever you can.

Distinguished Contributor
MonkeyTrainer
Posts: 158
Registered: ‎11-30-2007
Message 3 of 6 (214 Views)

Re: superelevated gutter

01-08-2013 02:20 PM in reply to: troma

i tried messing with the "parameter editor" from the cross-section viewer of the particular stations i need it changed on but, it doesnt change the slope of the gutter. i can physically change the number in the column, but the slope of my gutter isnt changing. i am using the urbancurbguttergeneral sub.

*Expert Elite*
klugb
Posts: 702
Registered: ‎09-04-2008
Message 4 of 6 (179 Views)

Re: superelevated gutter

01-08-2013 08:09 PM in reply to: MonkeyTrainer

You can lock in the gutter slope and ignore the lane slope.

 

 

Bruce Klug
AutoCAD Expert Elite
AutoCAD Civil 3D 2014 Certified Professional
Infrastructure Design Suite 2014 (SP2)
Testing Civil 3D 2015
Win 7 Pro, 64-bit
*Expert Elite*
troma
Posts: 2,525
Registered: ‎05-21-2008
Message 5 of 6 (163 Views)

Re: superelevated gutter

01-09-2013 05:48 AM in reply to: klugb

I really feel the 'Gutter Slope' entry should be faded out to gray when the slope method is ignoring it.  Then it would force you to change the method, avoiding a lot of confusion.


Credit where credit is due! Give kudos or accept as solution whenever you can.

Distinguished Contributor
MonkeyTrainer
Posts: 158
Registered: ‎11-30-2007
Message 6 of 6 (157 Views)

Re: superelevated gutter

01-09-2013 06:14 AM in reply to: troma

thanks everyone.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.