AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Distinguished Contributor
arobberson
Posts: 114
Registered: ‎12-05-2007
Message 1 of 18 (380 Views)

subassembly help

380 Views, 17 Replies
08-21-2013 11:09 AM

so i attached a road section i am trying to make and i am so confused maybe someone can help me solve the issue and show what needs to be changed in it 

 

using basicsideslopecutditch subassembly

 

 

thanks in advance

 

Allen G Robberson
arobberson@meai.com
Distinguished Contributor
arobberson
Posts: 114
Registered: ‎12-05-2007
Message 2 of 18 (379 Views)

Re: subassembly help

08-21-2013 11:12 AM in reply to: arobberson

that is just a cut section the fill section will be 

 

tie to grade at r/w line with a max slope of 4:1

Allen G Robberson
arobberson@meai.com
Distinguished Contributor
arobberson
Posts: 114
Registered: ‎12-05-2007
Message 3 of 18 (374 Views)

Re: subassembly help

08-21-2013 11:15 AM in reply to: arobberson

the slope on a fill can be between 4:1 and 30:1

Allen G Robberson
arobberson@meai.com
Distinguished Contributor
arobberson
Posts: 114
Registered: ‎12-05-2007
Message 4 of 18 (363 Views)

Re: subassembly help

08-21-2013 11:35 AM in reply to: arobberson

the cut of fill slope has to match the grade at the r/w

Allen G Robberson
arobberson@meai.com
*Expert Elite*
sboon
Posts: 2,199
Registered: ‎11-08-2005
Message 5 of 18 (286 Views)

Re: subassembly help

08-21-2013 06:04 PM in reply to: arobberson

The Basic subassemblies are useful for training purposes but you need to look at other subs for serious design.  Check out the DaylightToROW subassembly on the Daylight tab of the Tool Palette.  You're also probably going to need to use conditional subs to choose between cut and fill scenarios.

 

Steve
Please use the Accept as Solution or Kudo buttons when appropriate

Valued Mentor
fcernst
Posts: 1,131
Registered: ‎01-07-2011
Message 6 of 18 (270 Views)

Re: subassembly help

08-22-2013 04:01 AM in reply to: arobberson

The DaylightROW subassembly is defective.

 

 

http://forums.autodesk.com/t5/AutoCAD-Civil-3D/Confirmed-Defect-DaylightInsideROW-Subassembly-Not-Wo...

Fred Ernst, PE
C3D 2015
Ernst Engineering
www.ernstengineering.com
Distinguished Contributor
arobberson
Posts: 114
Registered: ‎12-05-2007
Message 7 of 18 (239 Views)

Re: subassembly help

08-22-2013 08:43 AM in reply to: fcernst

well that suck

Allen G Robberson
arobberson@meai.com
Distinguished Contributor
arobberson
Posts: 114
Registered: ‎12-05-2007
Message 8 of 18 (227 Views)

Re: subassembly help

08-22-2013 09:09 AM in reply to: arobberson

i would really appreciate if someone know how to create one and sed it to me i would be so fin happy. maybe we can work a trade

Allen G Robberson
arobberson@meai.com
Distinguished Contributor
arobberson
Posts: 114
Registered: ‎12-05-2007
Message 9 of 18 (215 Views)

Re: subassembly help

08-22-2013 01:29 PM in reply to: arobberson

I guess no one is jumping

Allen G Robberson
arobberson@meai.com
*Expert Elite*
sboon
Posts: 2,199
Registered: ‎11-08-2005
Message 10 of 18 (194 Views)

Re: subassembly help

08-22-2013 04:18 PM in reply to: arobberson

The subassembly that Fred references is NOT the one I suggested for this situation.

 

Steve
Please use the Accept as Solution or Kudo buttons when appropriate

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!