AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Distinguished Contributor
annw2
Posts: 1,288
Registered: ‎03-07-2006
Message 1 of 5 (186 Views)

subassembly - grass shoulder?

186 Views, 4 Replies
08-04-2007 09:57 AM
I like to have a 2 foot grass shoulder behind my curb for stability and transition. I used to use the cut /fill options in LDD/Civil

I would have the shelf slope up in cut and down in fill.

I found the guiderail option in the standard cut fill subassembly, but this only goes into play in fills. Can anyone point me to the 'correct' sub assembly to do what I want?
Ann Wingert, P.E.
*Expert Elite*
Civil3DReminders.com
Posts: 2,522
Registered: ‎10-13-2005
Message 2 of 5 (186 Views)

Re: subassembly - grass shoulder?

08-04-2007 03:05 PM in reply to: annw2
I think the GeneralDaylight is the one that is able to do this. Just fill out the Cut 1 and Fill 1 for the grass shoulder.

Christopher
http://civil-3d.blogspot.com/
Civil Reminders
http://blog.civil3dreminders.com/
http://www.CivilReminders.com/
Valued Contributor
randyowens3203
Posts: 60
Registered: ‎09-30-2009
Message 3 of 5 (124 Views)

Re: subassembly - grass shoulder?

11-06-2012 01:10 PM in reply to: Civil3DReminders.com

I need the same thing in C3D 2013, but do not have a GenerelDaylight subassembly. What do you suggest?

Randy A. Owens
Southland Engineering, Inc.
Win 7 64BIT
C3D 2013
*Expert Elite*
mathewk
Posts: 2,756
Registered: ‎07-09-2003
Message 4 of 5 (105 Views)

Re: subassembly - grass shoulder?

11-07-2012 05:23 AM in reply to: annw2
You sure DaylightGeneral does not exist for you? I'm looking at mine right now.
Matt Kolberg
Cansel - Autodesk Division
http://www.cansel.ca/
Valued Contributor
randyowens3203
Posts: 60
Registered: ‎09-30-2009
Message 5 of 5 (98 Views)

Re: subassembly - grass shoulder?

11-07-2012 10:21 AM in reply to: mathewk

Yes, it does. I was not looking in the right place. I will give it a try. Thanks.

 

Randy A. Owens
Southland Engineering, Inc.
Win 7 64BIT
C3D 2013
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.