AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Contributor
cadconfused
Posts: 31
Registered: ‎05-20-2013
Message 1 of 3 (256 Views)

Subassembly DaylightGeneral link code, change codes or priority of codes?

256 Views, 2 Replies
01-16-2014 07:49 AM

I have some custom Link Styles for Daylight_Fill, Daylight_Cut and Slope_Link.  In my Assembly the cut and fill branch off and the fill sections shows up as I want it, although the cut does not show up as Daylight_Cut, it instead shows up as Slope_Link, which I have set up as grass for a swale.  I noticed that if I hover over them the link codes are in different orders.

Fill shows: Top, Datum, Slope_Link, Daylight, Daylight_Fill       (Displays as Daylight_Fill and working as I would like)

Cut shows: Top, Datum, Daylight, Daylight_Cut, Slope_Link    (Displays as Slope_Link and not working as I would like)

 

It would appear that the order of the Link Codes is important and the last code overrides.  Is there a way to change the DaylightGeneral Link codes or change the order so I can make sure the one that I want shows up?

 

Thank you for any help.

Active Contributor
cadconfused
Posts: 31
Registered: ‎05-20-2013
Message 2 of 3 (226 Views)

Re: Subassembly DaylightGeneral link code, change codes or priority of codes?

01-17-2014 05:42 AM in reply to: cadconfused

No one has any ideas?

Distinguished Contributor
tscheevel
Posts: 330
Registered: ‎10-14-2003
Message 3 of 3 (221 Views)

Re: Subassembly DaylightGeneral link code, change codes or priority of codes?

01-17-2014 06:14 AM in reply to: cadconfused

Point and link codes are hard coded into the OOTB subassemblies. I believe the only ones you can change are in the generic links. I suspect that, when there are links with multiple codes applied, the software draws a link for each code with the last one on top. I've had situations where the color of a link in cross section view doesn't match a style of any of the multiple codes applied to it. You could edit your code set style to give the Slope_Link code a no display style, but then your swale wouldn't have the style you want. I'm a little rusty on the daylight subassemblies right now, but I suggest taking a look at the DaylightBasin2 subassemblies. They are quite flexible. Don't be put off by the berm. It's optional in fill conditions.  You might also try a combination of generic links which you code to suit yourself. You can make up your own codes for the genteic links. I even coded one HamSandwich once just for fun, and it worked.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.