AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Contributor
nathan.hendrickson
Posts: 32
Registered: ‎10-28-2011
Message 1 of 3 (162 Views)
Accepted Solution

strange shape printing on all prints from paperspace

162 Views, 2 Replies
12-03-2013 09:06 AM

I am not sure why this is happening.  I have attached a sheet with the rectangular shape that appears on all my prints from paperspace.

This does not show up when printing from model space.  Any help much appreciated

Using 2014 Civil 3D

*Expert Elite*
troma
Posts: 2,525
Registered: ‎05-21-2008
Message 2 of 3 (144 Views)

Re: strange shape printing on all prints from paperspace

12-03-2013 11:13 AM in reply to: nathan.hendrickson
Try this:
http://forums.autodesk.com/t5/AutoCAD-Civil-3D-General/Plot-problem-in-Civil-3D-2014/m-p/3922720#M20...


Credit where credit is due! Give kudos or accept as solution whenever you can.

Active Contributor
nathan.hendrickson
Posts: 32
Registered: ‎10-28-2011
Message 3 of 3 (137 Views)

Re: strange shape printing on all prints from paperspace

12-03-2013 11:42 AM in reply to: troma

thank you so much. that has been annoying myself and others for a few months on our plots.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.