Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I want use my corridor where I need it and not use one in certain areas. For a proposed dike. Some places doesn't need to be replace. So I need a way to use my section on the alignment. Anybody know where I can find that option?
divide your cooridor into regions and only use the portions needed..
Your Name Did you find this post helpful? Feel free to Like this post. Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Joe's method will work but you may find that the featurelines created by the corridor span across the gaps between regions. The way around this problem is to create a Null assembly (an assembly with no subassemblies attached to it) and use that for the regions where you need a gap.
There is another possible issue in that the corridor surfaces will span across the gaps, so your volume calcs may be affected. There are a few possible solutions for that problem - depending on how the corridor is created.
Your Name Did you find this post helpful? Feel free to Like this post. Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")