Solved: Re: Spot Elevation - Distance between PVI's?

kevinjackman · ‎10-22-2011

Im using Civil 3D 2012.

I want to show the distance between Profile PVI's on a Surface Spot Elevation.

Possible?

Joe-Bouza · ‎10-22-2011

You can add profile data to alignment labels that show stations. Some finessing the style may get the desired results.

Your Name
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

kevinjackman · ‎10-23-2011

I can add profile data to a spot elevation label without issue but i can't calculate the length between pvi's.

kevinjackman · ‎11-01-2011

Any of you label experts out there have the answer?

Joe-Bouza · ‎11-01-2011

Yes. use a featureline with a label style the shows the end elevations and distance between. Set the FL style to NoShow or NoPlot

Your Name
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

kevinjackman · ‎11-01-2011

Thanks Joe.

Joe-Bouza · ‎11-01-2011

HTH. Sometimes it takes a fresh look, and pulling out that stubby phillips head screwdriver the hardly gets used.

I see you also got the grade in there, nice.

Your Name
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

Joe-Bouza · ‎11-01-2011

another way I have used is to create a FL from an alignmentent. and you can use alignment label styles to label pgl in plan

Your Name
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

Spot Elevation - Distance between PVI's?

Spot Elevation - Distance between PVI's?

Forums Links

Post to forums