Im using Civil 3D 2012.
I want to show the distance between Profile PVI's on a Surface Spot Elevation.
Possible?
Solved! Go to Solution.
Solved by Joe-Bouza. Go to Solution.
You can add profile data to alignment labels that show stations. Some finessing the style may get the desired results.
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Yes. use a featureline with a label style the shows the end elevations and distance between. Set the FL style to NoShow or NoPlot
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
HTH. Sometimes it takes a fresh look, and pulling out that stubby phillips head screwdriver the hardly gets used.
I see you also got the grade in there, nice.
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
another way I have used is to create a FL from an alignmentent. and you can use alignment label styles to label pgl in plan
Joe Bouza
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Can't find what you're looking for? Ask the community or share your knowledge.