SP1 Network Deployment

[Anonymous]

It seems that when you modify an admin image of
Civil 3D 2007 w/ SP1 you lose the ability to apply a patch ever again. You can
modify any other part of the admin image but when you select the MSI file the
dialog box no longer depicts the fields/buttons to apply patches or
SP's.

I read Jon's post in the SP1a Released thread
below.

Can I rebuild the Admin Image with the same name
from the CD and the apply SP1. I think I tried this with LDT a few releases back
& had to reinstall on all clients because the Admin Image did not match the
client's record.

Can any of this be confirmed or denied before I
dive in.

--
John Mayo
Conklin Associates
LDT05, 07, C3D 07
P-IV @
3.0 GHz
2 GB RAM
128 MB QuadroFX500

[Anonymous]

I'm sure you took note of the thread
entitled "C3D 07 SP1A unable to slipstream into deployment image" started by
Lisa Pohlmeyer John.

Seems the dwg format revision wasn't
the only new "feature" to hit the streets.

😮

--
Don Reichle
"The only thing worse
than training your
staff,
and having them leave is -
not training your staff,
and having
them stay."
Courtesy Graphics Solution
Providers
----------------------------------------------------------
!!
Please discuss whatever we tell you with your SysMgr
!!
       !! They appreciate staying in the
loop 🙂 !!

LDT/CD-2K4
AMD Athlon 64 X2 Dual-Core 3800+ 2.01GHz
XP-Pro 32bit
SP2
2GB RAM
Dual WD800JD Hard Drives - 149GB Nvidia Stripe
Nvidia
Quadro FX 1300 128MB
Dual ViewSonic 19-inch VA902b monitors

"The only Constant is Change".

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"John Mayo" <JohnATConklinAssociates.com> wrote in message
href="news:5224639@discussion.autodesk.com">news:5224639@discussion.autodesk.com...

It seems that when you modify an admin image of
Civil 3D 2007 w/ SP1 you lose the ability to apply a patch ever again. You can
modify any other part of the admin image but when you select the MSI file the
dialog box no longer depicts the fields/buttons to apply patches or
SP's.

I read Jon's post in the SP1a Released thread
below.

Can I rebuild the Admin Image with the same name
from the CD and the apply SP1. I think I tried this with LDT a few releases
back & had to reinstall on all clients because the Admin Image did not
match the client's record.

Can any of this be confirmed or denied before I
dive in.

--
John Mayo
Conklin Associates
LDT05, 07, C3D 07
P-IV @
3.0 GHz
2 GB RAM
128 MB
QuadroFX500

[Anonymous]

The good news just never stops coming.

--
John Mayo
Conklin
Associates
LDT05, 07, C3D 07
P-IV @ 3.0 GHz
2 GB RAM
128 MB
QuadroFX500