AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Valued Contributor
Posts: 64
Registered: ‎06-15-2004
Message 1 of 4 (335 Views)

Sheet set not opening/blank

335 Views, 3 Replies
02-16-2012 05:30 AM

I have a project with a sheet set (both created in C3D 2012) that was working fine up until a couple of days ago.  Now, when I open the sheet set, there is nothing there.  And any sheet set I open is blank.  Any ideas??


Civil 3D 2012 (current SPs) 64x

Windows 7 Ultimate 64x



Civil 3D 2015
HP Phoenix
Win 7 Pro x64
Intel i7-3770 3.4Ghz - 16GB RAM
Nvidia GeForce GT 640
Distinguished Mentor
Posts: 776
Registered: ‎09-01-2004
Message 2 of 4 (334 Views)

Re: Sheet set not opening/blank

02-16-2012 05:51 AM in reply to: ChazBraz



I have heard others state that, even with those variables set correctly, occasionally they will get a sheet set that will not open automatically. I have not heard of a solution.

Jeff Paulsen
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
*Expert Elite*
Posts: 4,387
Registered: ‎07-22-2003
Message 3 of 4 (324 Views)

Re: Sheet set not opening/blank

02-16-2012 06:51 AM in reply to: ChazBraz

I had this issue a few weeks ago, opened a sheet set and nothing showed. Opened the same SS on a different PC and all files were fine. I ended up having to do a complete uninstall, reinstall of C3D2012.

Jeff_M, also a frequent Swamper
Valued Mentor
Posts: 664
Registered: ‎08-30-2007
Message 4 of 4 (209 Views)

Re: Sheet set not opening/blank

01-17-2013 01:22 PM in reply to: Jeff_M

Well, The same thing just happened to us and we don't really know why.

I opened a SS this morning that 2 others were working on. Nothing unusual so far.


It was empty. I assumed since it was a new project, it just hadn't been set up properly.

I added some drawings and filled in some properties.

This afternoon, the two other people got out of AutoCAD and when they got back in, the SSM was empty.

They had spent most of the morning renaming/renumbering the files in SSM so the restoration from yesterday was ot good. After several more restoration attempts, we had to just recreate the SS. (Easier than re-pathing everything) Not too bad, only a couple dozen drawings, but still.... what the heck happened?

During the process, I opened up other SSs and they, too, were blank. Scary!

I'm scared to open SS with my machine now.


Autodesk Alert | We are currently working on restoring Previous Version License request access in the Autodesk Subscription Center. If you are a subscription customer and would like to request a Previous Version License, please use this link as a temporary workaround. We apologize for the inconvenience and thank you for your patience.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.