AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Contributor
pdsfishhouse
Posts: 36
Registered: ‎10-24-2007
Message 1 of 5 (1,359 Views)
Accepted Solution

Select all on a layer

1359 Views, 4 Replies
02-16-2014 03:14 PM

What is the best way to select everything on a layer?  The layer has lines, arcs, and splines so select similiar is a poor method.  I have tried layiso but when I drag a window to select it still selects the forzen layers.  Thank You

The QSELECT command works well for this.

*Expert Elite*
Joe-Bouza
Posts: 4,966
Registered: ‎12-15-2008
Message 2 of 5 (1,358 Views)

Re: Select all on a layer

02-16-2014 03:15 PM in reply to: pdsfishhouse
Isolate the layer and select all
Thank you

Joseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram


Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS
*Expert Elite*
Jay_B
Posts: 2,403
Registered: ‎09-15-2010
Message 3 of 5 (1,346 Views)

Re: Select all on a layer

02-16-2014 04:03 PM in reply to: pdsfishhouse

The QSELECT command works well for this.

Jay

C3D 2014 SP2
Win 7 Professional 64 Bit
*Expert Elite*
pendean
Posts: 22,510
Registered: ‎11-06-2003
Message 4 of 5 (1,325 Views)

Re: Select all on a layer

02-16-2014 05:38 PM in reply to: pdsfishhouse
So does FILTER command :smileywink:
Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Member
jcrawford
Posts: 4
Registered: ‎04-08-2009
Message 5 of 5 (1,212 Views)

Re: Select all on a layer

02-20-2014 12:28 PM in reply to: pdsfishhouse

so does SSX

 

-Josh

Josh Crawford
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.