AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Member
nwtayeb
Posts: 10
Registered: ‎11-05-2011
Message 1 of 4 (170 Views)

Section Views advanced option

170 Views, 3 Replies
08-04-2013 01:44 AM

I want to add northing, easting and the elevation (point of the middle in the top layers) in section views annotation as you see in the picture, I tried my best but I couldn’t find how to do it, please any help???

X= Y= Z=
Nemdili Tayeb
Use:Civil 3d 2012

*Expert Elite*
Jay_B
Posts: 2,282
Registered: ‎09-15-2010
Message 2 of 4 (118 Views)

Re: Section Views advanced option

08-04-2013 05:56 PM in reply to: nwtayeb

Sorry I don't understand what you wish to label?

 

Can you show the exact location on the section view you want the X= Y= Z= to represent?

 

Jay

C3D 2014 SP2
Win 7 Professional 64 Bit
Active Member
nwtayeb
Posts: 10
Registered: ‎11-05-2011
Message 3 of 4 (105 Views)

Re: Section Views advanced option

08-05-2013 02:02 AM in reply to: Jay_B

in the Attachments

Nemdili Tayeb
Use:Civil 3d 2012

*Expert Elite*
wfberry
Posts: 1,840
Registered: ‎09-05-2006
Message 4 of 4 (88 Views)

Re: Section Views advanced option

08-05-2013 06:29 AM in reply to: nwtayeb

Normally this label information is used for staking the center line of the alignment.  It is quite easily done by automatically setting points along the alignment in plan (model) view.  These points (x,y,z) are located in a Point Group and exported to the Data Collector.

 

Bill


Windows 7 x 64 Professional
Nvidia GeForce 9800 & 8500
12 GB Ram
i7 965 @ 3.20 GHz
Corsair Force 240 GB SSD
Infrastructure Suite 2014

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.