AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Active Member
tbrown
Posts: 8
Registered: ‎06-18-2012
Message 1 of 2 (187 Views)
Accepted Solution

Section View Properties - Section Tab

187 Views, 1 Replies
10-16-2012 01:04 PM

My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?

Right-click that section view and go Update Section View... Or you may have removed your FG from the sample line. Go to sample more sources and ensure it's sampled. I generally try to tweak everything within the Section View Group Properties that way everything stays the same. Good Luck.

*Expert Elite*
LeafRiders
Posts: 322
Registered: ‎09-28-2010
Message 2 of 2 (174 Views)

Re: Section View Properties - Section Tab

10-16-2012 04:32 PM in reply to: tbrown

Right-click that section view and go Update Section View... Or you may have removed your FG from the sample line. Go to sample more sources and ensure it's sampled. I generally try to tweak everything within the Section View Group Properties that way everything stays the same. Good Luck.

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.