AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
StumpMasterFlex
Posts: 62
Registered: ‎09-25-2013
Message 1 of 2 (157 Views)
Accepted Solution

Section Bands

157 Views, 1 Replies
12-04-2013 02:46 PM

My section bands are posting elevations every metre.  How do I get my section bands to post every elevations only every 5 metres.  My Section Bands properties Major and Minor Intervals are greyed out (i assumed that is were you set them)?

Kindest Regards
Michael,
Draftsperson (Exploration Technologist)
Civil 3D 2013
Windows 8
Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
32. GB
64-bit Oepration System, x64-based processor
No Pen or Touch Input

I found it.  I had to uncheck the Match major/minor increments to vertical grid intervals check box in the lower left hand corner of the Section View Properties Bands Tab.

Valued Contributor
StumpMasterFlex
Posts: 62
Registered: ‎09-25-2013
Message 2 of 2 (153 Views)

Re: Section Bands

12-04-2013 02:51 PM in reply to: StumpMasterFlex

I found it.  I had to uncheck the Match major/minor increments to vertical grid intervals check box in the lower left hand corner of the Section View Properties Bands Tab.

Kindest Regards
Michael,
Draftsperson (Exploration Technologist)
Civil 3D 2013
Windows 8
Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz
32. GB
64-bit Oepration System, x64-based processor
No Pen or Touch Input
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.