AutoCAD Civil 3D General Discussion

AutoCAD Civil 3D General Discussion

Reply
Valued Contributor
rcallison
Posts: 71
Registered: ‎11-07-2012
Message 1 of 5 (170 Views)

Revise Stationing

170 Views, 4 Replies
12-10-2012 10:54 AM

How do I revise the profile stationing from 100+00 to display 100.

 

Also is it possible to remove the begining and end stations in the profile view

 

I have attached an example

 

Thanks,

 

Rick

*Expert Elite*
Jeff_M
Posts: 4,521
Registered: ‎07-22-2003
Message 2 of 5 (162 Views)

Re: Revise Stationing

12-10-2012 11:11 AM in reply to: rcallison

It's all in the styles:

12-10-2012 11-09-35 AM.png

Jeff_M, also a frequent Swamper
*Expert Elite*
troma
Posts: 2,525
Registered: ‎05-21-2008
Message 3 of 5 (161 Views)

Re: Revise Stationing

12-10-2012 11:11 AM in reply to: rcallison

Edit your Pofile View Style.

go to the Horizontal Axes Tab, where it says Tick label text click on the edit button on the right (with an 'A' on it)

Hightlight the text that is there, and look at the options on the left.

At the bottom (in my version anyway) is the 'Output'

Switch this to say 'left of station character' and then click on the arrow at the top to replace the text with the change you made.

Click Ok, Ok.


Credit where credit is due! Give kudos or accept as solution whenever you can.

*Expert Elite*
troma
Posts: 2,525
Registered: ‎05-21-2008
Message 4 of 5 (160 Views)

Re: Revise Stationing

12-10-2012 11:14 AM in reply to: rcallison

Also in the Horizontal Axes Tab I see the option to tick and label start station.  I don't see an option for the end station though.


Credit where credit is due! Give kudos or accept as solution whenever you can.

*Expert Elite*
Jeff_M
Posts: 4,521
Registered: ‎07-22-2003
Message 5 of 5 (151 Views)

Re: Revise Stationing

12-10-2012 11:32 AM in reply to: rcallison

And to turn off the start/end station label, turn off the bottom axis labels and use a Band to label the stations instead. You can then determine to use the start/end stationing.

 

12-10-2012 11-31-29 AM.png

 

Jeff_M, also a frequent Swamper
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.