Community
Civil 3D Forum
Welcome to Autodesk’s Civil 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Civil 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Reverse Pipe Start and End

2 REPLIES 2
Reply
Message 1 of 3
bgriffin291
5664 Views, 2 Replies

Reverse Pipe Start and End

I need to flip or reverse the start and end of a section of arch pipe.  I guess I drew them in backwards, thus my labeling is backwards, i.e. upstream invert is lower than downstream invert.

 

Reversing the flow direction does nothing as the start and end elevations are still the same.

 

Any suggestions?

2 REPLIES 2
Message 2 of 3

Reversing the flow direction makes the pipe slope positive or negative. It will not change the elevations, but it changes which side is used to calc the slope.

Michael Merlino
Civil Engineering Technician / "CAD Manager"
SAN JOSE, CA, USA
Message 3 of 3

After reversing the pipe direction, select the pipe, right click and select apply rules. This should adjust your inverts.



If a post provides a fix for your issue, click on "Accept as Solution" to help other users find solutions to problems they might have that are similar to yours.

Andrew Puller
Maitland, NSW, Australia
Windows 10 Enterprise 64bit
Intel core i7 11800 @ 2.30 GHz with 32GB Ram
Civil 3d 2021

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Rail Community


Autodesk Design & Make Report